Reply
   
 My Iphone has no signal / poor plz help 
 
 
  #1 (permalink)  
Old 23-03-2008, 08:47 PM
Member

Group: Registered Users
Location: adelaide


My Iphone has no signal / poor plz help

Hey guys,
I'm new here and I really need some help.

I have an Iphone that I bought online from a guy that previously tried to hack it. When I received it it was V 1.1.1 locked and unregistered. I jailbroke it and unlocked it using i.unlock.no's method. The guy previous to me and myself has only ever received poor and no signal. I Have tried vodafone, telstra and optus so its deffinetly not the carrier. I have tapped the back of the simcard to give it a more 'plush' sitting. I have tried using Ulctl to fix the comcenter. I have restored it to factory setting then upgraded it to 1.1.4 and unlocked and jailbroke. I HAVE TRIED EVERYTHING and still i get no signal. I have reset all the settings etc.

my current status: is 1.1.4 unlocked jailbroken and no service.

can someone help?

p.s I also have a problem with ibrickr when i was 1.1.1 it never allowed me to do anything with the apps.

thanks
micheal is offline
Profile CardPM
Go to the top of the page
Reply With Quote
Huy
  #2 (permalink)  
Old 23-03-2008, 09:01 PM
It's a cruel, cruel summer

Group: Regulars
Location: NSW


Do you have another non-iPhone to test the signal strength with? Try that.
Huy is offline
Profile CardPM
Go to the top of the page
Reply With Quote
  #3 (permalink)  
Old 23-03-2008, 09:04 PM
Member

Group: Registered Users
Location: adelaide


yeh mate, I live 3 km from city, My n95 has full bar, my w880i has full bars my iphone nothing
micheal is offline
Profile CardPM
Go to the top of the page
Reply With Quote
  #4 (permalink)  
Old 24-03-2008, 12:03 AM
Regular

Group: Regulars
Location: Perth


A long shot, but assuming the guy you got it fromm upgraded to 1.1.1 it might be worth sending it back to 1.0.2 then reupgrading to 1.1.1. I had a really bad no signal problem when I upgraded to 1.0.2 => 1.1.2 but after downgrading to 1.0.2 then only going as far as 1.1.1 I saved myself from insanity :-) seriously contemplated throwing int he towel and buying a new one, luckily I did the downgrade first.
choy is offline
Profile CardPM
Go to the top of the page
Reply With Quote
  #5 (permalink)  
Old 24-03-2008, 03:04 PM
Member

Group: Member
Location: Sydney


I would do a restore in Itunes to 1.1.4 then Ziphone to do everything takes 5 min and the restore should fix any problems and take it back to factory settings. Links on the forum as well as baby steps to follow if needed
__________________
Bean
bean is offline
Profile CardPM
Go to the top of the page
Reply With Quote
  #6 (permalink)  
Old 24-03-2008, 03:13 PM
I'm crackin' skulls

Group: Forum Leaders
Location: Melbourne


The other mobiles you mention are both 3G - it's possible you have good 3G reception but bad 2G reception. Seems unlikely 3km from the city but worth checking out.
__________________
MacBook 2.0 GHz Core Duo, iPhone 3G 16GB
criminaldeli.tumblr.com | twitter
tcn33 is offline
Profile CardPM
Go to the top of the page
Reply With Quote
  #7 (permalink)  
Old 24-03-2008, 03:41 PM
Banned

Group: Banned Users
Location: gangsters paradise


just curious? is your SIM card 3G only?
krafty is offline
Profile CardPM
Go to the top of the page
Reply With Quote
  #8 (permalink)  
Old 24-03-2008, 07:11 PM
Member

Group: Registered Users
Location: adelaide


thanks guys for your responses but still none the better. I have used a 2G telstra sim, a 2G vodafone sim and a 3G optus sim. I work in a phone shop and i assure you all my phones only run on 2G, I have excellent 2G coverage. Its currently been restored to 1.1.4 through Itunes and i have used Ziphone to unlock activate and jailbreak but im still stuffed. as for the 1.02 to 1.1.1, I think it came out of factory as a 1.1.1 its Imei isnt one of the older ones.

thanks for your input guys keep it coming, im going insane with no iphone waste of money.

ps i took it to a repair shop and they're idiots gonna charge me $50 to restore the software which i can do. and then even then they said they cant repair it and laughed at me:S
micheal is offline
Profile CardPM
Go to the top of the page
Reply With Quote
  #9 (permalink)  
Old 24-03-2008, 07:55 PM
Regular

Group: Regulars
Location: Sydney, Australia


My bet is that it is an internal antenna problem.
A hardware fault.. So that will need to be checked out either
(a) by Apple in the US
(b) by someone over here who knows enough about electronics in particular iPhone, I heard a rumour about a member here that has performed some iPhone repairs successfully. Boxhog? Anyone else confirm this?
__________________
 MacBook Pro 15.4" Matte, 2.4gHz C2D, 4GB RAM, 160GB HD, NVIDIA 8600M GT 256MB.  iPhone 3G 16GB Black. Canon 1D MkIII DSLR
SilverJ is offline
Profile CardPM
Go to the top of the page
Reply With Quote
  #10 (permalink)  
Old 24-03-2008, 10:17 PM
Member

Group: Registered Users
Location: adelaide


i may have to get onto him
micheal is offline
Profile CardPM
Go to the top of the page
Reply With Quote
  #11 (permalink)  
Old 31-03-2008, 06:03 PM
Member

Group: Registered Users
Location: adelaide


i still need help?
micheal is offline
Profile CardPM
Go to the top of the page
Reply With Quote
  #12 (permalink)  
Old 10-10-2008, 12:56 PM
Regular

Group: Regulars
Location: Colac


Instead of starting a new thread, I though I would tack onto this one.
My 1st gen iPhone has stopped getting signal.
When I turn it on, there is no signal, and the carrier(Telstra) logo does not appear and then after a few seconds its says no signal. It was working but not it is not. I tried a restore and then quickpwn but this has not worked.
Coul dit be hardware, and if so anyone know who can fix it?
denwol is offline
Profile CardPM
Go to the top of the page
Reply With Quote
  #13 (permalink)  
Old 10-10-2008, 01:11 PM
Addicted to anything made by Apple

Group: Regulars
Location: Melbourne


Quote:
Originally Posted by denwol View Post
Instead of starting a new thread, I though I would tack onto this one.
My 1st gen iPhone has stopped getting signal.
When I turn it on, there is no signal, and the carrier(Telstra) logo does not appear and then after a few seconds its says no signal. It was working but not it is not. I tried a restore and then quickpwn but this has not worked.
Coul dit be hardware, and if so anyone know who can fix it?
You might as well try this

Scared to upgrade your 1st-Gen iPhone to v2.1? MacTalk can do it for you!
__________________
Macbook Pro 2.4Ghz Unibody goodness
20 Inch Cinema Display
8Gb 3G iPhone, 3rd gen iPod Nano 4Gb, 3rd gen U2 ipod 20Gb
Comet is offline
Profile CardPM
Go to the top of the page
Reply With Quote
  #14 (permalink)  
Old 10-10-2008, 01:16 PM
Regular

Group: Regulars
Location: Colac


Hi,

Sorry i should have mentioned, the phone has been on 2.1

Thanks
denwol is offline
Profile CardPM
Go to the top of the page
Reply With Quote
  #15 (permalink)  
Old 10-10-2008, 03:12 PM
Regular

Group: Regulars
Location: Colac


Has anyone taken a phone apart. Could there be a problem with the aerial?
denwol is offline
Profile CardPM
Go to the top of the page
Reply With Quote
 
Reply

Thread Tools

 
Similar Threads
 
Thread Thread Starter Forum Replies Last Post
How To Increase Your WiFi Signal Signal tomricci Gadgets, Technology & the internet 7 24-02-2008 10:23 AM
Signal for iPhone/iPod Touch Nathanh iPhone & Mobile Phones 7 13-11-2007 12:33 PM
Eye TV Diversity 90%signal 0 signal quality - what gives cameraguy Peripherals 2 13-10-2007 06:24 AM
Need Help With Iphoto Plz ickvanovs Mac OS X & All Software 4 24-07-2005 11:05 AM
Printer Software!!!!!! PLZ HELP! applecollector Mac OS X & All Software 5 06-04-2005 06:56 PM