Maybe put in a link to the iClarified guide that people could also use. I followed it and the only problem I had was that it doesn't mention to put the iPhone into recovery mode in order to install the modified firmware file via iTunes.

Great guide laughingbird but shouldn't it be ilibertyX ? I thought iliberty+ was for windows

Their current download page is calling it "iLiberty+ for Mac" or "iLiberty+ for Windows".

Just wanted to give a massive thank you I used this tutorial today and it went off without a hitch. I was of course shitting myself the whole way through but i'm very happy. I went from 1.0.2 to 1.1.4. Awesome!

same here did it just now (although using pownge), but great to have a close to home detailed guide

cheers

Cheers for the guide. I skimmed over it and noticed a couple of things. I'll PM you about it laughingbird.

For those that want to know:

6.1 was not needed for me. Community Sources was already a payload from iLiberty+ and didn't need to be installed (only upgraded from 3.7 to 3.8). I used the latest iLiberty+ which was 1.51.

6.3 the Carrier Support was not required by me. In Installer it also says that Carrier Support is for 1.1.3 only so I didn't install it. I didn't need it either.

7.2 was not needed because I never changed Auto Lock to "Never" and it still worked fine (iTunes restored the iPhone, I was unable to change Auto Lock until AFTER iLiberty+ which makes sense because it is required to jailbreak, activate, unlock...).

PROBLEM #1 - FIXED
I am running into an issue though. Even with the tweaks, it does not recognise incoming SMS' from my contacts list (number matching). If I send outgoing SMS' then it will recognise them (since I'm sending it from my iPhone/using Address Book).

My numbers are formatted as 04########.
Incoming SMS' are in normal +61 ### ### ### format. I have also restarted my iPhone since installing the tweaks.

The problem? wpool.com's +61 number support tweak is pretty ineffectual. I used another one (iClarified repository) called "AppSupport Patch (1.1.4)" and it works fine. I'm now able to receive SMS' and have it matched up with my Address Book.

Read here for more, if you want to use a proper (well, for me) method. You will also need to uninstall wpool.com's tweak BEFORE applying iClarified's number support (AppSupport Patch) (just that +61 one (number support)... the number formatting one is fine, as is the carrier support from what I've heard).

iPhone 1.1.4 Aussie Localisation? - Apple iPhone - Mobile Phones - Whirlpool Broadband Forums

In summary?
Use wpool.com's Number Formatting - called "Aus Number Formatting".
Use iClarified's Number Support (SMS matching) - it is called "AppSupport Patch (1.1.4)".
I ignored the Carrier Support from wpool.com too.

PS all of my contacts are in 04######## format... none are stored as +61######### and I have not had to insert TWO numbers for the same contact (in both formats), just the one 04##... format

PROBLEM #2 - FIXED (I HOPE)
Also you may be charged for EDGE/GPRS traffic. Don't forget to punch in some garbage text for your EDGE settings if you want to stop this from happening. (Look inside Settings > General > Network > EDGE).

I noticed some GPRS (EDGE) traffic (Settings > Usage) and am getting charged again at Vodafone's insane rate of $1 per 5 minute blocks. DISABLE EDGE by inserting in a fake APN, username, pass (e.g. "get.stuffed.man", "go.away.please", "yeah.right.man" etc...). Check that these settings STOP GPRS traffic by restarting your iPhone and trying to load Safari and going to a website (or the Stocks widget, Weather, etc). It should complain about EDGE not working (this is what you want... no more hidden charges).

Monitor your GPRS usage... before you get a big bill/surprise.

Is an upgrade from 1.1.1 to 1.1.4 worth it?

My phone sometimes decides to not wake itself up from putting the screen to sleep - it's still active, because when someone calls/texts, the screen wakes up again.

Besides this minor annoyance, there aren't any complaints.

Sounds like you should upgrade to 1.1.4.

I had some minor problems with 1.1.3 (SIM card not detected twice) and have been on 1.1.4 for a few days now. The problem hasn't come back.

I am currently on an iPhone that was ZiPhone into 1.1.3. Can I just do the above tutorial as is? Should I do the clean up first?

Thanks

You shouldn't have to clean up.

Clean up is for those before 1.1.1 I reckon.

hey this is very helpfull i have not attempted it yet but i believe the phone is runing a locked ver of 1.1.1 so i will just do the tutorial word for word yes? would any one else like to offer any other handy tips before i begin?

cheers

Use Pwnage 1.1 software. No need to upgrade in baby steps, just go straight to 1.1.4

could you please expand on that.

can you link me to the program?

give me a brief explanation of the prosses requiered?

thanks

Forum search
iPhone Pwnage 1.1 released
New iPhone Pwned or ZiPhone 3.0 or iLibertyX?

Hey could some one please link me to a working down load page of Iliberty+ please.

thanks